Drawbar or connection between vehicles must not exceed 15 feet in
length; a red flag, other signal, or cloth not less than 12 inches in
length and width must be used.

A vehicle towed upon a street or highway must be coupled to the
towing vehicle by means of a safety chain, chains, cable, or other
equivalent device, in addition to the regular hitch or coupling.

• The additional connecting safety devices must be connected to both
  the towing and towed vehicles and to the drawbar or other rigid
  connecting device so as to prevent the device from dropping to the
  ground in the event of a failure.
• The additional safety devices must be of sufficient strength to retain control of the towed vehicle in the event of failure.

Devices used for towing shall not exceed 15 feet from 1 vehicle to the other.

Connection must be sufficiently strong to pull all weight towed.

Safety chain is required.

12-inch flag or cloth required on connections consisting only of chains, ropes, or cables.

Fifth wheel mechanisms and adapters must be equipped with a manual release locking device.

Safety chain required. No limitations on hitch except the
connections between vehicles must be of sufficient strength to pull all
weight being towed.

Every camp trailer is required to be attached by a hitch and
shall be coupled to the frame of the towing vehicle by means of a safety
chain, chains, cables, or equivalent device which shall be of
sufficient strength to control the trailer in event of failure of the
regular hitch or coupling.

Safety chain is recommended.

Any time a vehicle is being towed by use of a hitch, safety chains shall also be used to secure the vehicles.

When a vehicle is towing a trailer or semitrailer by means of a
hitch to the rear of the vehicle, there shall be attached in addition
thereto safety chains, cables, or other safety devices.

Safety chain required.

Ball hitch either mounted on bumper or secured to frame is acceptable; safety chain is required.

Hitch must be secured to frame; no safety chain required.

Safety chains are required in addition to regular coupling device
(drawbar). Trailers of 3,000 to 5,000 lbs. are required to have brakes
on only 1 wheel on each side. Trailers over 5,000 lbs. must be equipped
with brakes on all wheels and must have automatic breakaway application.

Double safety chain required for all trailers; type of hitch not specified.

Weight-equalizing hitches that apply leverage by means of spring
bars, coil springs, or torsional bars are approved for use with
trailers.

5th-wheel types of connections and sway control devices that employ
friction, hydraulics, torsional bars, mechanical cams, or electronics
are approved to limit side sway.

Hitch must be capable of towing the trailer safely, with adequate
safety chain. If second towed vehicle is attached, first towed vehicle
must have an anti-sway mechanism.

Frame mounted on equalizer type hitch is recommended. Safety chain is required.

No requirements by law as to type of hitch or mount. Safety
chains required on all trailers under 6,000 lbs. Tow bar not required.

Safety chains or steel cable must be made of wire that measures at least 1/4 inch in thickness.

Every full trailer shall be equipped with a tow bar and means of attaching the tow bar to the towing and towed units.

The tow bar and means of attaching the tow bar to the units shall be
structurally adequate for the weight drawn; be mounted properly and
securely, without excessive slack, but with enough play to allow for
universal action of the connection; and have a suitable locking device
to prevent accidental separation of the towed and towing vehicles.

The mounting of the trailer hitch of the towing vehicle shall include
sufficient reinforcement or bracing of the frame to provide sufficient
strength and rigidity to prevent undue distortion of the frame.

Every trailer and semitrailer equipped with a tow bar and any special
mobile equipment being towed shall be coupled directly to the frame of
the towing vehicle with 1 or more safety chains or cables, and the
chains or cables shall be connected to the towed or towing vehicle and
to the tow bar to prevent the tow bar from dropping to the ground if it
fails.

Every trailer, except a semitrailer, shall, in addition to a
regular hitch, be fastened by safety chains to prevent it from breaking
away from the towing vehicle.

The hitch cannot exceed 15 feet in length from 1 vehicle to the
other and may not allow either vehicle to deviate more than 3 inches
from the other.

If the connection consists of a chain, rope, or cable, there shall be
displayed upon the connection a red flag or other signal or cloth not
less than 12 inches both in length and width.

The drawbar or other connection between the 2 vehicles must not be more than 15 feet.

Every trailer which shall be towed on public highways at a speed
greater than 20 mph shall be coupled to the towing vehicle by means of a
safety chain, chains, cables, or equivalent devices in addition to the
regular trailer hitch or coupling.

No more slack shall be left in any safety chains, cables, or
equivalent devices than shall be necessary to permit proper turning. The
safety chains, cables, or equivalent devices shall be so connected to
the towed and towing vehicles and to the drawbar to prevent the drawbar
from dropping to the ground if the drawbar fails and shall be of
sufficient strength to control the trailer in the event of failure of
the regular trailer hitch or coupling.

Safety chains or an equivalent device are required in addition to
the primary coupling device, except for 5th-wheel or gooseneck-type
vehicles.

A trailer or pole trailer with GVW of 3,000 lbs. or less must be
equipped with a steel safety chain or cable with a minimum diameter of
1/4 inch must be securely fastened to the towing unit. The safety chain
or cable may not be connected to the ball but must be connected to the
hitch or other frame member of the towing vehicle to prevent the drawbar
from dropping to the ground if the ball, socket, or coupler fails.

Safety chains required.

Safety chains are required.

Ball hitch shall be mounted on bumper or secured to frame; safety chain is required.

Trailers shall be connected to the towing vehicle by at least 1
chain or cable, in addition to the hitch bar, of sufficient strength to
hold the trailer on a hill if the hitching bar becomes disconnected, or
be provided with an adequate device to prevent its rolling backward.

Hitch must be secured to frame; safety chain required; double safety chain required for gross weight in excess of 3,000 lbs.

Device of a type approved by Commissioner of Motor Vehicles. Each
approved towing system must include safety chains. Ball hitch mounted
on bumper permitted.

The towed vehicle, if the primary towing attachment is a hitch,
shall also be attached to the towing unit by means of safety chains or
cables of sufficient strength to hold the gross weight of the towed
vehicle in the event the hitch fails or becomes disconnected.

Trailers or semitrailers having locking pins or bolts in the towing
attachment and semitrailers in combination with vehicles equipped with
5th-wheel assemblies, do not need the safety chains or cables.

The drawbar or other coupling device between vehicles, one of
which is towing the other, must include safety chains connecting the
vehicles. The drawbar, coupling device, and safety chains must be of a
design, strength, and construction so as to prevent the unintentional
uncoupling of the vehicles.

When 1 vehicle is towing another vehicle, the drawbar or other connection may not exceed 15 feet from 1 vehicle to the other.

When the connection consists only of a chain, rope, or cable, there
shall be displayed upon such connection a white flag or cloth not less
than 12 inches square.

In addition to a drawbar or other connection, each trailer and each
semitrailer which is not connected to a commercial tractor by means of a
5th wheel shall be coupled with stay chains or cables to the vehicle by
which it is being drawn.

Every trailer or semitrailer shall be equipped with a coupling
device, which shall be so designed and constructed that the trailer will
follow substantially in the path of the vehicle drawing it, without
whipping or swerving from side to side.

Every trailer, semitrailer (unless drawn by a truck-tractor), or
manufactured home shall be equipped with chains or cables to prevent
parting from the towing vehicle in the event that the coupling device
breaks or becomes disengaged; or chains, cables, or a safety device that
provides strength, security of attachment, and directional stability
equal to or greater than that provided by safety chains that prevent the
parting from the towing vehicle.

Adequate to control trailer under all conditions of varying
speeds and weights; 1 safety chain is required on all trailers with 2
connections to the towing vehicle. The tensile strength of the safety
chain must equal the gross weight of the trailer.

Whenever 2 vehicles are connected by a ball-and-socket type
hitch, or pintle hook without a locking device, they must also be
connected by 2 safety chains of equal length, each safety chain having
an ultimate strength at least equal to the gross weight of the towed
vehicles. The safety chains must be crossed and connected to the towed
and towing vehicle and to the towbar to prevent the towbar from dropping
to the ground in the event the towbar fails or becomes disconnected.
The safety chains must have no more slack than is necessary to permit
proper turning.

When 1 vehicle is towing another, the drawbar or other connection
must be of sufficient strength to pull the weight towed and must not
exceed 15 feet in its span from one vehicle to the other.

Drawbar or other connection must be of sufficient strength to
pull all weight towed. Drawbar or other connection must not exceed 15
feet from 1 vehicle to the other except when transporting objects which
cannot readily be dismembered. When 1 vehicle is towing another vehicle
and the connection consists of a chain, rope, or cable, there must be
displayed upon such connection a white flag or cloth not less than 12
inches square.

Either ball hitch mounted on bumper or secured to frame is permitted; safety chain is required.

Any vehicle being towed by another vehicle must be connected to
the towing vehicle with a chain that is reasonably capable of
maintaining the attachment of the 2 vehicles in case of failure of any
other attachment device.

The drawbar or other connection between a vehicle towing another
vehicle and the towed vehicle must be strong enough to pull all weight
towed and may not exceed 15 feet between the vehicles except for the
connection between 2 vehicles transporting poles, pipe, machinery, or
other objects of a structural nature that cannot be readily dismembered.

A driver towing another vehicle and using a chain, rope, or cable to
connect the vehicles must display on the connection a white flag or
cloth not less than 12 inches square.

A driver of a passenger car or light truck may not tow a trailer,
semitrailer, house trailer, or another motor vehicle unless safety
chains of a type approved by the DPS are attached in an approved manner
from the trailer, semitrailer, house trailer, or towed motor vehicle to
the towing vehicle.

Every towed vehicle shall be coupled by means of a safety chain,
cable, or equivalent device, in addition to the regular trailer hitch or
coupling. The safety chain or cable shall be securely connected with
the chassis of the towing vehicle, the towed vehicle, and the drawbar.
The safety chain or cable shall be of sufficient material and strength
to prevent the 2nd vehicle from becoming separated and shall have no
more slack than is necessary for proper turning. The safety chain or
cable shall be attached to the trailer drawbar so as to prevent it from
dropping to the ground, and to assure the towed vehicle follows in the
course of the towing vehicle in the case the vehicles become separated.
The requirement for chains or a cable does not apply to a semitrailer
having a connecting device composed of a 5th-wheel and kingpin assembly,
or to a pole trailer.

In addition to a hitch, trailer coaches must be secured to the
towing vehicle, while in operation on any highway, by a safety chain.
The hitch on any motor vehicle towing a trailer coach and the
corresponding coupling on the coach and safety chain must be adequate to
ensure the public safety.

The connection between any two vehicles, one of which is towing
or drawing the other on a highway, shall consist of a fifth wheel,
drawbar, trailer hitch, or other similar device not to exceed 15 feet in
length from one vehicle to the other. Any such two vehicles shall, in
addition to such drawbar or other similar device, be equipped at all
times when so operated on the highway with an emergency chain or cable
that is structurally adequate to securely stop and hold the trailer
being towed.

A vehicle towing a trailer must use safety chains.

The drawbar or other connection between vehicles in combination must
be of sufficient strength to hold the weight of the towed vehicle on any
grade where operated. No trailer may whip, weave, or oscillate or fail
to follow substantially in the course of the towing vehicle.

Turn signals and reflectors are required.

A drawbar or connection must be of sufficient strength to pull
the weight towed and must not exceed 15 feet from one vehicle to another
except when transporting poles, pipe, machinery, or other objects of a
structural nature that cannot be dismembered.

When a vehicle is towing another, and the connection consists of a
chain, rope, or cable, a white flag or cloth not less than 12 inches
square must be displayed.

The drawbar or other connection between 2 vehicles may not exceed 12 feet in length.

In addition to the hitch, every towed vehicle must be coupled to the
towing vehicle by means of safety chains, leveling bars, or cables. This
provision does not apply to a vehicle equipped with a 5th-wheel and
kingpin assembly.

Ball hitch mounted on bumper is permitted.

Two separate means of attachment (i.e., tow bar and safety
chains) are required so that the failure of 1 will not affect the other.

Must be secured to frame; safety chain required.

A drawbar connection must not exceed 5 meters.

The drawbar or connection used to tow must not exceed 5 meters
from 1 vehicle to another except for vehicles transporting poles, pipes,
machinery, or other objects that because of their structure cannot be
dismembered.

When a vehicle is towing another and the connection consists of a chain,
rope, or cable, a white flag or cloth not less than 30 cm must be
displayed on the connection.

Hitch and safety chain or metal cable equal in strength to the principal coupling device required.

A towing vehicle must be equipped with a coupling device in the
form of a 5thwheel hitch, pintle hook, drawbar hitch, ball hitch, or
other approved coupling device that is designed to support the trailer
the person intends to tow.

Any coupling device, other than a 5th-wheel hitch, must be equipped with
an alternate coupling device that is designed to support the same
weight as the main coupling device.

No person may operate a vehicle equipped with a coupling device unless
it is securely mounted to the frame of the vehicle, has no missing or
ineffective fasteners, and is free of cracks or breaks in the assembly.

Ball hitch mounted on bumper, on 1/2 ton, and 1-ton units is
permitted. The drawbar shall not exceed 4.6 meters in length from 1
vehicle to the other vehicle. Safety chains are required.

A towing vehicle must be equipped with a coupling device in the
form of a 5thwheel hitch, pintle hook, drawbar hitch, ball hitch, or
other approved coupling device that is designed to support the trailer
the person intends to tow.

Any coupling device, other than a 5th-wheel hitch, must be equipped with
an alternate coupling device that is designed to support the same
weight as the main coupling device.

No person may operate a vehicle equipped with a coupling device unless
it is securely mounted to the frame of the vehicle, has no missing or
ineffective fasteners, and is free of cracks or breaks in the assembly.

Two separate means of attachments required; so constructed and
attached that the failure of 1 such means will not permit the motor
vehicle, trailer, object, or device being drawn to become detached.

When 1 vehicle is towing another with a drabber, ball hitch, or
other type of utility trailer hitch, the connection must be of
sufficient strength to pull all the weight being towed. Also, the
combination of vehicles must be connected with at least 2 safety chains
of equal length, and each chain must be of sufficient strength to hold
the vehicles together in case the connection between the vehicles breaks
or is accidentally disconnected.

Every trailer operated without an independent brake system
adequate to stop the vehicle if the trailer becomes separated from the
towing vehicle must be equipped with chains, cables, or any other safety
device that is sufficiently solid and installed to ensure that the
trailer and towing vehicle remain attached in the event of a failure in
the attachment devices. The towing vehicle must carry the necessary
equipment for attaching the chains, cables, or safety device of any
trailer being towed.

No person may pull a trailer without using an adequate coupling device.
The lights, raking system, chains, cables, and any other safety device
on the trailer must be connected to the towing vehicle and in proper
working condition.

Must be connected by a safe clevis or catch. Ball hitch mounted on
bumper permitted up to 1400 kg; safety chain required. Hitch must be
rated for the combined weight of trailer(s) and contents. Two safety
chains must cross under the hitch.